- Data
- TerraSAR-X/TanDEM-X full archi...
TerraSAR-X/TanDEM-X full archive and tasking
Navigate To
How to Access Data
Project Proposal (Restrained)
- Go to the ESA User Services Portal
- Register or log in to EO Sign In - Users are recommended to provide their institutional email address when registering a new account
- After logging in, complete and submit the form with your proposed use of the data
- The proposal will be evaluated by ESA, which normally takes between 4 and 6 weeks
- Upon successful evaluation, you will receive a confirmation email, which describes the amount of data to be provided, and details of how to order the data
The collection is open for research and application development projects, exclusively for non-commercial and non-operational activities and for civil Earth observation research applications only. Access to the data requires submission of a Project Proposal, which is subject to evaluation and acceptance by ESA and the data owner.
ESA will support as many high-quality and innovative projects as possible within the quota limit available, therefore only a limited amount of products can be allowed to each project.
Learn more about the quota limit and see a comparison with other missions in our FAQ: How much data may I request in a Project Proposal?
The products are available as part of the Airbus provision from TerraSAR-X and Tandem-X missions with worldwide coverage: the TerraSAR-X/TanDEM-X Catalogue can be accessed to discover and check the basic product data readiness.
All details about data provision and availability, data access conditions, usage restrictions and the quota assignment procedure are described in the Terms of Applicability document available in the Resources section.
If you need help with the proposal form, consult this guide on how to access data requiring a project proposal
For further information about the EO Sign In Service you can visit TellUs
Should you need support to prepare your proposal or access the data, please contact EOHelp
Available to Residents of the Following Countries
Collection Description
TerraSAR-X/TanDEM-X full archive and new tasking products can be acquired in six image modes with flexible resolutions (from 0.25 m to 40 m) and scene sizes and are provided in different packages:
- Staring SpotLight (basic, Interferometric pack, and Maritime pack)
- High Resolution SpotLight (basic, Interferometric pack, and Maritime pack)
- SpotLight (basic, Interferometric pack, and Maritime pack)
- StripMap (basic, Interferometric pack, and Maritime pack)
- ScanSAR (basic and Maritime pack)
- Wide ScanSAR (basic and Maritime pack)
Products | SAR-ST | SAR-HS | SAR-SL | SAR-SM | SAR-SC | SAR-WS |
Instrument mode | Staring Spotlight | High Resolution SpotLight | SpotLight | StripMap | ScanSAR | Wide ScanSAR |
Available resolutions (up to) | 0.25 m | 1 m | 2 m | 3 m | 18 m | 40 m |
Scene size | 4x3.7 km2 | 10x5 km2 | 10x10 km2 | 30x50 km2 (up to 30x1650) | 100x150 km2 (up to 100x1650) | 270x200 km2 (up to 270x1500) |
Available processing levels | SSC (Single Look Slant Range Complex): azimuth - slant range (time domain) MGD (Multi Look Ground Range Detected): azimuth - ground range (without terrain correction) GEC (Geocoded Ellipsoid Corrected): map geometry with ellipsoidal corrections only (no terrain correction performed) EEC (Enhanced Ellipsoid Corrected): map geometry with terrain correction, using a DEM | |||||
Format | SSC: DLR-defined COSAR binary MGD: GeoTiff GEC: GeoTiff EEC: GeoTiff | |||||
Spatial coverage | Worldwide | |||||
Interferometry package |
| N/A | N/A | |||
Maritime Monitoring package |
|
The following WorldDEM products can be requested:
Products | Description |
WorldDEMcore | WorldDEMcore is output of interferometric processing of StripMap data pairs without any post-processing |
WorldDEMTM | WorldDEMTM is produced based on WorldDEMcore, representing the surface of the Earth (including buildings, infrastructure and vegetation). Hydrological consistency is ensured |
WorldDEM DTM | In additional editing steps, WorldDEMTMis transformed into a Digital Terrain Model (DTM) representing bare Earth elevation |
WorldDEM Bundle | Includes WorldDEMTM, WorldDEM DTM, and Quality Layers |
The main specifications of the WorldDEM products are:
- Horizontal Coordinate Reference System: World Geodetic System 1984 (WGS84-G1150)
- Vertical Coordinate Reference System: Earth Gravitational Model 2008 (EGM2008)
- Absolute Horizontal Accuracy: <6 m
- Vertical Accuracy: 2 m Relative, 4 m Absolute
- Quality Layers (including water body mask) can be requested as an option with the WorldDEM and WorldDEM DTM
- Auxiliary Layers are delivered together with the WorldDEMcore product
As per ESA policy, very high-resolution data over conflict areas cannot be provided.
Technical Details
DATA SET SPECIFICATIONS
PROCESSING LEVEL
Having Problems Accessing Data?
Resources
Discover Latest Data
External Calibration and Validation of the Biomass Mission
ESA is pleased to announce the opening of the CAL/VAL Announcement of Opportunity (AO) call for the Biomass mission. With this call ESA invi...
SARSimHT-NG
The SARSimHT-NG campaign aimed to evaluate the feasibility of obtaining snow water equivalent (SWE) and surface soil moisture (SSM) measurem...
EarthCARE X-MET L1D Products
This EarthCARE collection contains the following data products: AUX_MET_1D: meteorological analysis and forecast fields X-MET provided by EC...
ICEYE Sample Data
Download free ICEYE sample datasets to preview products available for this mission....